Calibrate Sensors

Calibrate

Sensors very rarely require re-calibration, even in extreme environments. CALIBRATE is used to set the sensor’s gyroscope and accelerometer.

If the status is set as “Unknown” and shown in RED, then it is possible that the sensors can provide inaccurate data.

To calibrate the sensors click on the sensor settings icon in the top right-hand corner and click Calibrate sensors.

To calibrate the Gyroscope, simply leave the sensors on a flat surface with the light up for 2-3 seconds. This tells the Gyroscope that they are in a still state. The Gyro symbol will turn green. To calibrate the Accelerometer; move the sensors through different 45° angles stopping at each 45° angle for a second. 4-5 angles should be sufficient. The status will change to GREEN once each sensor has been re-calibrated. The pop-up screen will disappear once the App has identified all sensors as being correctly calibrated.